The Lite Light Video light Model LL36P can be mounted on the universal accessory show of any camcorder or digital camera by sliding it into place and tightening the mounting screw.


Battery

The LL36P comes with a rechargeable, non-replaceable Lithium ion battery. The battery comes pre-installed from the manufacturer.

Note: Use only the supplied AC adapter/charger to power the light and charge the batteries.

 

To charge the battery

1. Connect the appropriate AC adapter to the charger for your country.

2. Insert the jack on the power cord into the power input jack on the rear of the LL36. The red LED indicator light, located beside the power jack, will turn on when charging.

3. The battery must charge 3-4 hours before it is fully charged.
Note: Indicator light will turn green when charging is complete

4. Fully charged batteries will provide 45 to 60 minutes depending on battery usage.

5. The light can be in use while being powered by the AC charger. While the light is powered by the AC adapter, the battery also recharges.

 

Special Notes

For maximum illumination, use the patent-pending interlocking design to construct a multi-light array. (For example 4 x 3 or 16 x 9.)
When using multiple lights, each light must be charged individually
The lens has been frosted to diffuse light evenly and eliminate hot spots.

 

Operation

Turn on or off by sliding on/off switch to the desired position

 

Specifications

This package includes:

1 – LL36P Video Light

1 – AC Adapter

1 – User Manual (This document)

4 – Different power plugs

LEDs: 36, ~4500 Color Balanced

Power: Lithium ion or AC Adapter

Battery Run Time: 45 to 60 minutes depending on battery usage

Charge Time: 3 hours for a full charge

Battery Type: 3.7V 730mA Li-ion

Charger: 120-220V AC input; 5V DC output

Weight: 2.5oz (with battery)

Size: 2.35” x 2.3” x 1”

Multi-Light Array

Multiple LL36P units can be assembled into a multi-array by connecting them together using our patent-pending interlocking design. There is no limit to the number of units that can be interlocked.

To connect two units, simply slide the show of one LL36P into the mounting slot on the side or top of the other unit. Tighten the adjustable nut to secure the unit.

Note: Lights do not provide power to one another. Each light must be charged and switched ON/OFF individually.

 

90 Day Limited Warranty

Barber Tech warrants this product against defects in materials and workmanship for a period of 90 days from the date of retail purchase. During the warranty period, the product will be repaired or replaced, at BarberTech’s option.

 

Conditions:

This warranty is void if any defects are caused by abuse, misuse, negligence or unauthorized repairs. All liability for incidental or consequential damages is specifically excluded. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal right and you may also have other rights which vary from state to state.

 

ACCESSORIES

 
Flexi Arm

The Flexi Arm is a device that allows you to adjust lighting and other accessories that you use with the hot shoe of your video camera. The unit consists of a 10" flexible arm with a male shoe on one end and a female shoe on the other end.

[LEARN MORE]

$39.00
Purchase Price